400KVA 630KVA 10kV 0.4kV Mobile Transformer Substation Metal - Clad
Contact Person : Julia
Phone Number : 86-18037871307
WhatsApp : +8618037871307
Minimum Order Quantity : | Negotiation | Price : | Negotiation |
---|---|---|---|
Packaging Details : | According to client's request. 7.5mva 33kv semi-trailer transformer substation 11/0.4kv | Delivery Time : | Depends on the quality of client |
Payment Terms : | 30% advanced payment , 70% balance payment before shipment. | Supply Ability : | 10 Set/Sets per Year 7.5mva 33kv semi-trailer transformer substation 11/0.4kv |
Place of Origin: | China | Brand Name: | DINGLI |
---|---|---|---|
Model Number: | Mobile substation |
Detail Information |
|||
Certification: | ISO9001/CE | Material: | Copper |
---|---|---|---|
Type: | Three Phase | Model Number:: | CZBT1 |
Rated Voltage: | Electronic | Usage: | Electricity Transmission Project |
Product Name: | 69kv 63mva Power Transformer Mobile Substation With Iron Core | Rated Capacity: | 10mva |
Output Voltage:: | 110kv | Retated Voltage: | 50hz |
Frequency:: | 50/60Hz | Type:: | Three Phase |
Standard:: | ANSI C57.12 | Coil Number:: | 2 Windings |
High Light: | portable substation,mobile substation trailer |
Product Description
One Trailer Type Mobile Transformer Substation 10 Mva Low Partial Discharge
Total Solution for the field below:
Small hydro power station·Overhead transmission line·Substation,including mobile substation
and modular substation·Distribution network·Electricity Maintenance·Electricity investment·
Telecom tower and accessories
Quick Detail:
One-trailer type 10 MVA mobile electricity substation
Features:
1) Amount of local discharged: The apparent discharge amount is less than 80pC under 1.5 times of rated voltage;
2) Noise: Products of 63MVA and below is lower than 58 dB (AN);
3) Power loss: no-load loss is 30% lower than that of IEC standard;
4) Reliability: All in-service products have no damages or oil leakage occurred;
Application:
60 ~220 kV power system of power plant, substation, mining enterprise and etc.
Technologies:
Design: relative developed software are adopted in Electromagnetic calculations, strength analysis, leakage magnetic distribution, its electro-dynamic force and electrical insulation.
Manufacture:
Core: effectively upgrade transformer's no-load performance by below methods:
1) The core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet and the material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burs controlled within 0.02mm.
2) The silicon sheet fabrication adopts "no-upper yoke lapped' technology and all lapped joints of the silicon sheet are 45 full-miters. The laminated core sheets are integrally pressed and adhered with epoxy resin to make the three leg two-yoke core a strong and flat integral one with good verticality precision, this effectively improves no-load performance and reduces noises.
3) Bracing plates are used as support between coil leg and inner coil. The iron yoke is tied with epoxy resin-impregnated glass fiber band, and the lower section of oil tank is tightened with counter-pressure bolts. The upper iron and the upper section of oil tank are fixed at three locations. Hence the body inside the oil tank can withstand the vibration during transportation without any shift.
Winding:
1) The high-voltage (HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.
2) In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding, effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.
3) The winding adopts radial "0" margin designed, between the core and the paper sleeve of LV winding, and between the LV, HV, voltage-regulating windings, as well as before insertion of stays and shroud plate they are fully dried and tightly matched to ensure extremely good compactness and concentricity of the entire winding.
Oil tank and accessories
1) The tank wall adopts wide steel sheet, which will be folded into corrugated structure without splicing, in this way welds are decreased and mechanical strength is enhanced, meanwhile, the corrugated wall has diverging effect, and thus plays a role in decrease of noise. The routing troughs and control cabinets of the secondary circuit are all made of stainless steel, so the entire transformer has a simple and good looking.
2) All sealing surface use quality sealing material and are precision-machined.
3) On the edge of the tank there are double sealing grooves, and the outer sealing material is used to shade the atmosphere and ultra-ray to protect the inner sealing being damaged, thus at utmost prolonging service life and enhancing reliability of the seal.
No | Item | Unit | Parameter | |
1 | Main transformer capacity | MVA | 5, 7.5, 10, 15, 20, 25, 31.5, 40, 50 | |
2 | Rated voltage of the switch on HV side | kV | 33, 35, 66, 110, 132, 145, 220 | |
3 | Rated current on HV side | A | 630, 1250, 2000 | |
4 | Rated short circuit breaking current | kA | 25, 31.5, 40 | |
5 | Rated voltage of the switch on LV side | kV | 6.6, 11, 13.8, 22, 33, 35 | |
6 | Rated current on LV side | A | 1250, 2000, 2500, 3150 | |
7 | Rated short circuit breaking current | kA | 25, 31.5, 40 | |
8 | Rated frequency | Hz | 50/60 | |
Ambient Environment | ||||
10 | Ambient temperature | ℃ | -40 ~ +60 | |
11 | Salar radiation | W/m2 | 1000 | |
12 | Humidity | % | ≤95 | |
13 | Height above sea level | m | ≤2000 | |
14 | Wind Speed | m/s | 40 | |
15 | Earthquake | Horizontal acceleration | g | General area:0.15g Stricken area:0.3g |
Vertical acceleration | g | General area:0.075g Stricken area:0.15g |
1. We offer the best solution and products to fulfill the buyers' requirments.
2. We can arrange technicians to install the equipments and train your staff on site.
3. Anytime, we provide considerate technical consultation.
4. Prompt reply for your inquiry and feedback.
Packaging
1.Specific packaging can be made to order.
You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt of your order.And also can send by sea or air, kindly send me the port of yours.
1. About us
HENAN DINGLI was founded in 1963 as a small electric power equipment manufacturer, after more than 50 years’development, DINGLI now is group company dedicated on total solutions for electricity projects covering survey, design, manufacture, complete equipment supply, construction, operations, maintenance, investment and so on. HENAN DINGLI actively devote to power grid construction, participated in all UHV construction projects and made an outstanding contribution to UHV transmission lines of China.
Since 2000, HENAN DINGLI has been actively developing international business, successively built Ecuador, Cambodia manufacturing Base, Quito tower design center, Spain, Peru, Chile and other overseas service centers. We have got a number of international certificates, such as ISO certificate covering design, equipment and construction, AWS welding certificate, ASTM system certificate, Chile NCH 203 certificate, Colombia RETIE certificate, Costa Rica material quality Certificate, etc. By the end of 2018, the overall proportion of international business is more than 30% of the company's main revenue. We have provided high-quality products and services to more than 100 customers in 33 countries, including the markets of Europe, America, Africa and Southeast Asia. With strong technical support and on-site service capability, HENAN DINGLI has saved a lot of project costs for customers and won their recognition.
2. International Certificate
ASTM,RETIE,Nch203,Costa Rica ASTM,EPC,TCL,ect.
3. After-Sale Service
Technical Support
Technical support on pre-sales stage. DINGLI has own survey and engineering company with more than 100 engineers. We have special pre-sales engineer to work with customer at early stage of the project.
Site assistance
Site assistance in Latin American market, so far we have sales and service center in Spain, Chile, Bolivia, Peru, Ecuador, Senegal, which will make a fast response for customer.
Warehouse and Emergency Supply
Warehouse and emergency supply for spare parts, damage parts and missing parts: DINGLI has built production line in Quito and warehouse for transmission line and distribution network in Ecuador, Bolivia and Senegal with common use spare parts.
Design and Consultant
Supported by both domestic engineering company and Quito tower design center, could provide technical consultant and design service within our scope of work. For Quito tower design center, most of the engineers are local staffs. The Design is based on ASTM protocols meantime with GB material standard, which will reduce the weight, and avoid the replacement on the profiles to save the working time.
Package
Set-wisely packing or member-wisely packing as per client's requirements.
Global-network map
China
Henan DINGLI Pole and Tower Co., ltd.
Henan Zhongdingxin Detection Technology Co.,ltd.
Henan Dadi Electricity Engineering Co.,ltd.
Henan DINGLI Power Equipment Co.,ltd
Henan DINGLI Power Construction Co., ltd
Huading Concrete Pole Co., Ltd
Xingjiang Huili Steel Tower Co., Ltd.
Bazhou Dingli Tower Co., Ltd.
Shanghai Sales and Service Center
Beijing Sales and Service Center
Cambodia
Cambodia Phnom Penh Factory
Spain
Madrid (Spain) Sales and Service Center
Dakar, Senegal
Senegal (Dakar) Sales and Service Center
Senegal (Dakar) Spare Part Warehouse
Quito, Ecuador
Quito (Ecuador) Steel Tower Design Center (ASTM Standard)
Quito (Ecuador) Steel Tower Emergency Production Line
Quito (Ecuador) Raw Material and Spare Part Warehouse
Lima, Peru
Lima (Peru) Sales and Service Center
Cochabamba, Bolivia
Cochabamba (Bolivia) Raw Material and Spare Part Warehouse
Santiago, Chile
Santiago (Chile) Sales and Service Center
Jakarta, Indonesia
Jakarta (Indonesia) Sales and Service Center
Customer Visit
Clients of Bolivia visited Dingli for factory inspection, we talked about the key issues faced right now, and found ways to solve it together. They set a high value on this cooperation.
Customers and Partners of Dingli
Enter Your Message